VEER make Single Sheet Tester SST-500 is complete stand alone Instrument to measure AC magnetic properties ofo Electrical Steel of all grade and gauges mostly. It refers IEC 60404-3 Standard. SST Sensor testing method is standard & worldwide accepted method to test important magnetic parameters like Watt/kg, VA/kg, Magnetizing Force, Permeability, From Factor etc on different Induction (Flux Density). We provide Software to Generate Test Report and Graphs. Hysteresis Curve (B/H) facility also available in software.
| SPECIFICATIONS OF SINGLE SHEET TESTER SST-500 | |
| Parameters | SST-500 |
| Sine Wave Generator | 30Hz to 70 Hz |
| Source Current Capacity | 3 Amp Peak or 2 Amp RMS |
| Sourcing Voltage Capacity | 50 Volt RMS |
| Peak Magnetizing Force | 1000 AT/m |
| Distortion of Sine Wave | Less than 1% at no load |
| Auto Protetion of Source | Auto Shut off for more than 3 Amp Peak |
| Protection of Mains Power | Fuse and Auto Over Voltage cut Off |
| Power Supply Voltage | 230V ± 10% @ 50Hz (110V ± 10% @ 60Hz on Request) |
| Operationg Temprature & Humidity | 10°C to 50° C Temprature & Less than 75% Humidity (Non Condensation) |
| Dimensions ( W x D x H ) in mm | 485 mm x 484 mm x 195mm approx. |
| Weight of Instrument | 15 kg approx. |
| Power Consumption | 85 VA approx. (for 500 gram at No Load) |
| SPECIFICATIONS OF SST SENSOR | |
| Parameters | SST-500 |
| Bridge Size | 500 mm (45 cm mean Length) |
| Specimen Size | 500 x 500 mm |
| Specimen Weight Capacity | 1000g |
| Dimensions ( W x D x H ) in mm | 1205 mm x 605 mm (200mm for sample support tray) x 1605mm approx. |
| Sensor Weight | 450 Kg approx |
| Air Flux Compensating coil | Mounted inside the Yoke. |
| ACCURACY OF SST-500 | ||
| Parameters | SST-500 FSD ± % |
Accuracy Required IEC 60404-3 ± % |
| RMS Voltmeter | ± 0.2% | ± 0.2% |
| RMS Ammeter | ± 0.2% | ± 0.2% |
| Watt Meter | ± 0.5% | ± 0.5% |
| Flux Voltmeter | ± 0.2% | ± 0.2% |
| Peak Ammeter | ± 0.5% | ± 0.5% |
| Frequency | ± 0.1% | ± 0.1% |
